{"id":3282,"date":"2026-02-16T09:38:17","date_gmt":"2026-02-16T08:38:17","guid":{"rendered":"https:\/\/koenig-mtm.de\/products-services\/mechanical-clamping-systems\/"},"modified":"2026-06-25T16:06:33","modified_gmt":"2026-06-25T14:06:33","slug":"mechanical-clamping-systems","status":"publish","type":"page","link":"https:\/\/koenig-mtm.de\/en\/products-solutions\/mechanical-clamping-systems\/","title":{"rendered":"Mechanical clamping systems"},"content":{"rendered":"

[vc_section full_height=”yes” content_placement=”bottom” css=”.vc_custom_1772437605425{background-image: url(https:\/\/koenig-mtm.de\/wp-content\/uploads\/2026\/03\/koenig-mtm_headerbild-mechnanisch2.jpg?id=1126) !important;background-position: center !important;background-repeat: no-repeat !important;background-size: cover !important;}” el_class=”header–img”][vc_row][vc_column][vc_column_text css=””]<\/p>\n

Maximum control for your production \u2013 mechanically controlled<\/h1>\n

[\/vc_column_text][\/vc_column][\/vc_row][\/vc_section][vc_section el_class=”bg–black”][vc_row][vc_column][vc_raw_html css=””]PHZpZGVvIGF1dG9wbGF5PSIiIG11dGVkPSIiIGxvb3A9IiIgcGxheXNpbmxpbmU9IiIgY29udHJvbHM9IiI+CiAgPHNvdXJjZSBzcmM9Imh0dHBzOi8va29lbmlnLm9hby1lbnR3aWNrbHVuZy5kZS93cC1jb250ZW50L3VwbG9hZHMvMjAyNi8wMy9XaWxoZWxtLUtvZW5pZy1NVE0tTWVjaGFuaWNhbC1DbGFtcGluZy1TeXN0ZW1zLUFJLUltcHJvdmVkXzEubXA0Ij4KIFlvdXIgYnJvd3NlciBkb2VzIG5vdCBzdXBwb3J0IHRoaXMgdmlkZW8uCjwvc291cmNlPjwvdmlkZW8+[\/vc_raw_html][\/vc_column][\/vc_row][\/vc_section][vc_section el_class=”headline–blue bg–white”][vc_row][vc_column][vc_column_text css=””]<\/p>\n

Mechanical clamping systems<\/h2>\n

[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column][vc_empty_space][\/vc_column][\/vc_row][vc_row][vc_column][vc_column_text css=””]<\/p>\n

Single taper clamping system, M1+M4<\/h3>\n

[\/vc_column_text][vc_row_inner gap=”20″][vc_column_inner width=”1\/2″][vc_column_text css=”.vc_custom_1782395970696{padding-top: 15px !important;}”]Single taper clamping system from WILHELM K\u00d6NIG MTM
\n<\/strong>The single taper clamping system from WILHELM K\u00d6NIG MTM was specifically developed to meet the challenges of short clamping lengths, medium and large workpiece diameters, and varying tolerances. It is characterized by its simple but effective mode of operation: the axial movement of the collet via the single taper generates a precise radial expansion of the clamping area. This not only reliably clamps the workpiece, but also centers and stabilizes it, pulling it down axially.<\/p>\n

This principle enables secure clamping even with difficult workpiece geometries, ensuring a reliable grip with maximum precision. Thanks to the quick and easy change of collets, the system shows its strengths particularly in automated processes or with frequently changing workpieces.[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/2″ css=”.vc_custom_1773213591649{background-image: url(https:\/\/koenig-mtm.de\/wp-content\/uploads\/2026\/02\/koenig-mtm-bg-lightblue.jpg?id=172) !important;}”][vc_column_text css=””]<\/p>\n

Type M1<\/h3>\n

[\/vc_column_text][vc_single_image image=”3275″ img_size=”full” alignment=”center” css=””][\/vc_column_inner][\/vc_row_inner][vc_row_inner equal_height=”yes” gap=”20″][vc_column_inner width=”1\/2″ css=”.vc_custom_1773213546459{background-image: url(https:\/\/koenig-mtm.de\/wp-content\/uploads\/2026\/02\/koenig-mtm-bg-lightblue.jpg?id=172) !important;}”][vc_column_text css=””]<\/p>\n

Type M4<\/h3>\n

[\/vc_column_text][vc_single_image image=”3276″ img_size=”full” alignment=”center” css=””][\/vc_column_inner][vc_column_inner width=”1\/2″ css=”.vc_custom_1773213642081{padding-bottom: 15px !important;background-color: #E6E9F5 !important;}”][vc_column_text css=””]\n\n\n\n\n\t\n\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t
TYPE<\/th>\n<\/tr>\n<\/thead>\n
mechanical<\/td>\n<\/tr>\n
MANDREL<\/td>CHUCK<\/td>\n<\/tr>\n
M1<\/td>M4<\/td>\n<\/tr>\n
TYPES OF ACTUATION<\/td>\n<\/tr>\n
Hydraulic pressure, mechanical push or pull force<\/td>\n<\/tr>\n
MACHINE CONNECTION<\/td>\n<\/tr>\n
Flange, cone, quick-change system<\/td>\n<\/tr>\n
PROPERTIES<\/td>\n<\/tr>\n
Roundness and run-out accuracy \u2264 0.005 mm
\nPermits large workpiece tolerances
\nHigh torques can be transmitted
\nAutomated clamping
\nLarge loading clearance due to high clamping strokes
\nHigh rigidity due to axial pull down of the workpiece
\nQuick and easy to retool for other clamping diameters
\nBalancing tension can be implemented if required<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n[\/vc_column_text][\/vc_column_inner][\/vc_row_inner][\/vc_column][\/vc_row][\/vc_section][vc_section el_class=”bg–light headline–blue”][vc_row][vc_column][vc_column_text css=””]<\/p>\n

Segment clamping system, E1+E2<\/h3>\n

[\/vc_column_text][vc_row_inner equal_height=”yes” gap=”20″][vc_column_inner width=”1\/3″][vc_column_text css=”.vc_custom_1782395914934{padding-top: 15px !important;}”]Segment clamping system from WILHELM K\u00d6NIG MTM
\n<\/strong>The segment clamping system from WILHELM K\u00d6NIG MTM is the ideal solution for clamping workpieces with compact to large clamping diameters. By using segment collets in different sizes, workpieces with varying clamping diameters can be clamped flexibly on a base. The expansion of the collets is precise and reliable thanks to the guided movement over the single taper.<\/p>\n

A special feature of the collets is the material combination of high-quality tool steel and a high-tech elastomer. Depending on the size, the collets can expand by up to 1.2 mm while offering impressive durability and load capacity.[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/3″ css=”.vc_custom_1773213748994{background-image: url(https:\/\/koenig-mtm.de\/wp-content\/uploads\/2026\/02\/koenig-mtm-bg-lightblue.jpg?id=172) !important;border: 1px solid #FFFFFF !important;}”][vc_column_text css=””]<\/p>\n

Type E1, E2<\/h3>\n

[\/vc_column_text][vc_single_image image=”3277″ img_size=”full” alignment=”center” css=””][\/vc_column_inner][vc_column_inner width=”1\/3″ css=”.vc_custom_1773213781264{border-top-width: 1px !important;border-right-width: 1px !important;border-bottom-width: 1px !important;border-left-width: 1px !important;padding-bottom: 15px !important;border-left-style: solid !important;border-right-style: solid !important;border-top-style: solid !important;border-bottom-style: solid !important;border-color: #FFFFFF !important;}”][vc_column_text css=””]\n\n\n\n\n\t\n\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t
TYPE<\/th>\n<\/tr>\n<\/thead>\n
mechanical<\/td>\n<\/tr>\n
MANDREL<\/td>CHUCK<\/td>\n<\/tr>\n
x<\/td><\/td>\n<\/tr>\n
TYPES OF ACTUATION<\/td>\n<\/tr>\n
Hydraulic pressure, mechanical push or pull force<\/td>\n<\/tr>\n
MACHINE CONNECTION<\/td>\n<\/tr>\n
Flange, cone, quick-change system<\/td>\n<\/tr>\n
PROPERTIES<\/td>\n<\/tr>\n
Permits very large workpiece tolerances
\nRoundness and run-out accuracy \u2264 0.005 mm
\nLarge loading clearance due to high clamping strokes
\nHigh rigidity due to axial pull down of the workpiece
\nQuick and easy to retool for other clamping diameters
\nReplaceable segment clamping sleeves as stock items
\nHigh dirt resistance<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n[\/vc_column_text][\/vc_column_inner][\/vc_row_inner][\/vc_column][\/vc_row][\/vc_section][vc_section el_class=”bg–white headline–blue”][vc_row][vc_column][vc_column_text css=””]<\/p>\n

Thread clamping system, G1+G4<\/h3>\n

[\/vc_column_text][vc_row_inner gap=”20″][vc_column_inner width=”1\/2″][vc_column_text css=”.vc_custom_1782396042611{padding-top: 15px !important;}”]Thread clamping system from WILHELM K\u00d6NIG MTM
\n<\/strong>The thread clamping system from WILHELM K\u00d6NIG MTM offers an efficient solution for the precise clamping of workpieces. The system consists of a screwed-on collet chuck mounted on a sturdy base mandrel. Thanks to a ground thread profile and an axial movement, the collet moves over the profile with high precision, resulting in a uniform cylindrical expansion \u2013 even with long clamping lengths.<\/p>\n

Thanks to this technology, tolerances of up to IT 13 and beyond can securely be clamped, depending on the application and clamping diameter.[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/2″ css=”.vc_custom_1773213848906{background-image: url(https:\/\/koenig-mtm.de\/wp-content\/uploads\/2026\/02\/koenig-mtm-bg-lightblue.jpg?id=172) !important;}”][vc_column_text css=””]<\/p>\n

Type G1<\/h3>\n

[\/vc_column_text][vc_single_image image=”3278″ img_size=”full” alignment=”center” css=””][\/vc_column_inner][\/vc_row_inner][vc_row_inner equal_height=”yes” gap=”20″][vc_column_inner width=”1\/2″ css=”.vc_custom_1773213928203{background-image: url(https:\/\/koenig-mtm.de\/wp-content\/uploads\/2026\/02\/koenig-mtm-bg-lightblue.jpg?id=172) !important;}”][vc_column_text css=””]<\/p>\n

Type G4<\/h3>\n

[\/vc_column_text][vc_single_image image=”3279″ img_size=”full” alignment=”center” css=””][\/vc_column_inner][vc_column_inner width=”1\/2″ css=”.vc_custom_1773213909742{padding-bottom: 15px !important;background-color: #E6E9F5 !important;}”][vc_column_text css=””]\n\n\n\n\n\t\n\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t
TYPE<\/th>\n<\/tr>\n<\/thead>\n
mechanical<\/td>\n<\/tr>\n
MANDREL<\/td>CHUCK<\/td>\n<\/tr>\n
G1<\/td>G4<\/td>\n<\/tr>\n
TYPES OF ACTUATION<\/td>\n<\/tr>\n
Hydraulic pressure, mechanical push or pull force<\/td>\n<\/tr>\n
MACHINE CONNECTION<\/td>\n<\/tr>\n
Flange, cone, quick-change system<\/td>\n<\/tr>\n
PROPERTIES<\/td>\n<\/tr>\n
Uniform cylindrical expansion for longer clamping points
\nPermits large workpiece tolerances
\nRoundness and run-out accuracy \u2264 0.005 mm
\nLarge loading clearance due to high clamping strokes
\nHigh rigidity due to axial pull down of the workpiece
\nQuick and easy to retool for other clamping diameters
\nAxial pull-down<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n[\/vc_column_text][\/vc_column_inner][\/vc_row_inner][\/vc_column][\/vc_row][\/vc_section][vc_section css=”.vc_custom_1771332929323{background-image: url(https:\/\/koenig-mtm.de\/wp-content\/uploads\/2026\/02\/koenig-mtm-pattern-black.jpg?id=42) !important;}” el_class=”bg–pattern–black”][vc_row][vc_column][vc_column_text css=””]<\/p>\n

Find your contact person here<\/h2>\n

[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column width=”1\/6″][\/vc_column][vc_column width=”1\/3″][\/vc_column][vc_column width=”1\/2″][vc_btn title=”Your direct line to the expert” style=”classic” shape=”square” size=”lg” align=”left” css=”” el_class=”btn–outline-white” link=”url:https%3A%2F%2Fkoenig-mtm.de%2Fen%2Fsales-service%2F%23ansprechpartner|title:Contact%20Person|”][\/vc_column][\/vc_row][\/vc_section][vc_section el_class=”bg–light headline–blue”][vc_row][vc_column][vc_row_inner][vc_column_inner][vc_column_text css=””]<\/p>\n

Sliding jaw clamping system, M1<\/h3>\n

[\/vc_column_text][\/vc_column_inner][\/vc_row_inner][vc_row_inner equal_height=”yes” gap=”20″][vc_column_inner width=”1\/3″][vc_column_text css=”.vc_custom_1782396223671{padding-top: 15px !important;}”]Sliding jaw clamping system from WILHELM K\u00d6NIG MTM
\n<\/strong>The high-precision sliding jaw mandrel from WILHELM K\u00d6NIG MTM is the ideal clamping solution for mandrel shafts where the centers form the basis for further machining steps. With a concentricity accuracy of better than 0.003 mm, the sliding jaw mandrel fullfils the highest precision requirements, ensuring perfect results for grinding, milling, and turning operations.<\/p>\n

The clamping system is based on a sophisticated principle: after loading, the workpiece is centerd precisely between the cone on the clamping system and the tailstock center. When the drawbar is actuated, the evenly spaced, equalizing sliding jaws are pressed outwards via a taper mechanism. The floating sliding jaws press against the bore of the workpiece, ensuring secure clamping and efficient torque transmission.[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/3″ css=”.vc_custom_1773214040188{border-top-width: 1px !important;border-right-width: 1px !important;border-bottom-width: 1px !important;border-left-width: 1px !important;padding-bottom: 15px !important;border-left-style: solid !important;border-right-style: solid !important;border-top-style: solid !important;border-bottom-style: solid !important;border-color: #FFFFFF !important;}”][vc_column_text css=””]\n\n\n\n\n\t\n\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t
TYPE<\/th>\n<\/tr>\n<\/thead>\n
mechanical<\/td>\n<\/tr>\n
MANDREL<\/td>CHUCK<\/td>\n<\/tr>\n
x<\/td><\/td>\n<\/tr>\n
TYPES OF ACTUATION<\/td>\n<\/tr>\n
Hydraulic pressure, mechanical push or pull force<\/td>\n<\/tr>\n
MACHINE CONNECTION<\/td>\n<\/tr>\n
Flange, cone, quick-change system<\/td>\n<\/tr>\n
PROPERTIES<\/td>\n<\/tr>\n
Compensating clamping forces possible in unqualified bores
\nRoundness and axial run-out accuracies \u2264 0.003 mm
\nLarge workpiece tolerances possible
\nPermits large workpiece tolerances
\nHigh rigidity due to flat clamping of the workpiece
\nWorkpiece clamping between centers<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/3″ css=”.vc_custom_1773214006578{background-image: url(https:\/\/koenig-mtm.de\/wp-content\/uploads\/2026\/02\/koenig-mtm-bg-lightblue.jpg?id=172) !important;border: 1px solid #FFFFFF !important;}”][vc_column_text css=””]<\/p>\n

Type M1<\/h3>\n

[\/vc_column_text][vc_single_image image=”3280″ img_size=”full” alignment=”center” css=””][\/vc_column_inner][\/vc_row_inner][\/vc_column][\/vc_row][\/vc_section][vc_section el_class=”bg–white headline–blue” css=”.vc_custom_1773214397479{background-position: center !important;background-repeat: no-repeat !important;background-size: cover !important;}”][vc_row][vc_column][vc_row_inner][vc_column_inner][vc_column_text css=””]<\/p>\n

Friction cone clamping system, M4<\/h3>\n

[\/vc_column_text][\/vc_column_inner][\/vc_row_inner][vc_row_inner equal_height=”yes” gap=”20″][vc_column_inner width=”1\/3″ css=”.vc_custom_1773214142895{padding-bottom: 15px !important;background-color: #E6E9F5 !important;}”][vc_column_text css=””]\n\n\n\n\n\t\n\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t
TYPE<\/th>\n<\/tr>\n<\/thead>\n
mechanical<\/td>\n<\/tr>\n
MANDREL<\/td>CHUCK<\/td>\n<\/tr>\n
<\/td>x<\/td>\n<\/tr>\n
TYPES OF ACTUATION<\/td>\n<\/tr>\n
Tailstock force<\/td>\n<\/tr>\n
MACHINE CONNECTION<\/td>\n<\/tr>\n
Flange, cone, quick-change system<\/td>\n<\/tr>\n
PROPERTIES<\/td>\n<\/tr>\n
Suitable for workpieces with critical interference contours
\nRoundness and axial run-out accuracies \u2264 0.003 mm
\nActuated by tailstock unit<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/3″ css=”.vc_custom_1773214155392{background-image: url(https:\/\/koenig-mtm.de\/wp-content\/uploads\/2026\/02\/koenig-mtm-bg-lightblue.jpg?id=172) !important;}”][vc_column_text css=””]<\/p>\n

Type M4<\/h3>\n

[\/vc_column_text][vc_single_image image=”3281″ img_size=”full” alignment=”center” css=””][\/vc_column_inner][vc_column_inner width=”1\/3″][vc_column_text css=”.vc_custom_1782396287022{padding-top: 15px !important;}”]Friction cone clamping system from WILHELM K\u00d6NIG MTM
\n<\/strong>One of the main features of our friction cone systems is the quick and easy clamping of shaft parts, even if the space between the clamping diameter and the machining area is limited.<\/p>\n

For clamping the force of the tailstock center presses the workpiece into the carbide insert of the friction cone. After machining, the workpiece can be released from the carbide insert using the ejector or loading center. The ejector unit is actuated either by hydraulic machine pressure, pressure force from the machine, or by the spring unit.[\/vc_column_text][\/vc_column_inner][\/vc_row_inner][\/vc_column][\/vc_row][\/vc_section][vc_section el_class=”bg–light headline–blue”][vc_row][vc_column][vc_row_inner][vc_column_inner][vc_column_text css=””]<\/p>\n

Diaphragm clamping system, M4<\/h3>\n

[\/vc_column_text][\/vc_column_inner][\/vc_row_inner][vc_row_inner equal_height=”yes” gap=”20″][vc_column_inner width=”1\/3″ css=”.vc_custom_1773214323448{background-image: url(https:\/\/koenig-mtm.de\/wp-content\/uploads\/2026\/02\/koenig-mtm-bg-lightblue.jpg?id=172) !important;border: 1px solid #FFFFFF !important;}”][vc_column_text css=””]<\/p>\n

Type M4<\/h3>\n

[\/vc_column_text][vc_single_image image=”3284″ img_size=”full” alignment=”center” css=””][\/vc_column_inner][vc_column_inner width=”1\/3″][vc_column_text css=”.vc_custom_1782396371593{padding-top: 15px !important;}”]Diaphragm clamping system from WILHELM K\u00d6NIG MTM
\n<\/strong>The outstanding feature of our diaphragm clamping system is the ability to clamp sensitive, thin-walled workpieces reliably and without distortion. The diaphragm is activated via a drawbar and is applied evenly to the component \u2013 for maximum dimensional accuracy with minimal deformation.<\/p>\n

Specially developed for machining internal gears, the system guarantees reliable clamping of workpieces even at high speeds thanks to the integrated centrifugal force compensation. The closed design reliably protects the chuck from contamination, while clearances between the clamping points allow targeted chip removal to the side.<\/p>\n

The diaphragm clamping system will be customized to your machine connection and workpiece geometry \u2013 for maximum precision, a long service life, and trouble-free operation.[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/3″ css=”.vc_custom_1773214342044{border-top-width: 1px !important;border-right-width: 1px !important;border-bottom-width: 1px !important;border-left-width: 1px !important;padding-bottom: 15px !important;border-left-style: solid !important;border-right-style: solid !important;border-top-style: solid !important;border-bottom-style: solid !important;border-color: #FFFFFF !important;}”][vc_column_text css=””]\n\n\n\n\n\t\n\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t\n\t
TYPE<\/th>\n<\/tr>\n<\/thead>\n
mechanical<\/td>\n<\/tr>\n
MANDREL<\/td>CHUCK<\/td>\n<\/tr>\n
<\/td>x<\/td>\n<\/tr>\n
TYPES OF ACTUATION<\/td>\n<\/tr>\n
Pull force<\/td>\n<\/tr>\n
MACHINE CONNECTION<\/td>\n<\/tr>\n
Flange, cone<\/td>\n<\/tr>\n
PROPERTIES<\/td>\n<\/tr>\n
Centrifugal force compensation
\nTargeted chip removal
\nDirt-resistant
\nLow-deformation clamping of thin-walled workpieces<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n[\/vc_column_text][\/vc_column_inner][\/vc_row_inner][\/vc_column][\/vc_row][\/vc_section][vc_section el_class=”bg–pattern–black” css=”.vc_custom_1771918244601{background-image: url(https:\/\/koenig-mtm.de\/wp-content\/uploads\/2026\/02\/koenig-mtm-hintergrund-blau-krone.jpg?id=60) !important;}”][vc_row][vc_column][vc_column_text css=””]<\/p>\n

Download our catalogs now<\/h2>\n

[\/vc_column_text][vc_column_text css=””]Discover our complete product range in a clear overview in our current catalogs.
\nSimply fill out the form and get direct access to the download.<\/p>\n

We will also occasionally send you information about new products and solutions.[\/vc_column_text][\/vc_column][\/vc_row][vc_row][vc_column][vc_column_text css=””]

\n
\n
\n
\nDownloadformular EN Catalogue<\/legend>\r\n\r\n
\n\n\n\n\n\n
\r\n\t